Large-inclination Belt Conveyor

Wave edge conveyor belt: traction and carrying role in the conveyor.

Wave blocking edge, transverse partition plate and baseband form the "brake" description of conveying materials, so as to achieve large inclination transmission.

Drive device: it is the power part of the conveyor.

It is composed of Y series motor, ZJ axle reducer and wedge stop.

Transmission drum: it is the main component of power transmission, and the conveyor belt runs by the friction between it and the transmission drum.

This series of transmission drum has rubber surface and smooth surface, rubber surface drum is to increase the adhesion between the drum and the conveyor belt.

Turning roller: used to change the running direction of the conveyor belt.

Turning roller is used for the lower surface of the conveyor belt (not bearing surface).

Pressure belt wheel: used to change the running direction of the conveyor belt, and used for the upper surface of the conveyor belt (bearing surface).

Holler: the idler is used to support the materials on the conveyor belt and make it run stably.

This series has two types of upper parallel roller and lower flat roller.

Belt roller: The belt roller is used to support the conveyor belt on the convex arc frame, which is supported on the empty edge on both sides of the retaining conveyor belt.

Several sets of belt rollers form a circular arc section for changing the direction of the conveyor belt.

The belt roller is cantilever supported.

Vertical roller: the vertical roller is used to limit the deviation of the conveyor belt, and is installed on the upper and lower excessive section frame.

Each filter section is equipped with 4 racks, with two upper and lower levels.

Papping wheel cleaning device: used to beat the back of the conveyor belt and shock the material stuck on the conveyor belt.

Tension device: its functions are: 1. Make the conveyor belt has enough tension, to ensure that the conveyor belt and the transmission drum do not slip.

2. Limit the vertical degree of the conveyor belt in each support room to make the conveyor operate normally.

This series adopts a screw tightening device.

Rack, head funnel, head cover, guide groove, intermediate frame, intermediate frame leg, etc.: in the conveyor respectively play a support, dust and guide role.

This series of middle frame legs have low, Chinese and high three.

The lower horizontal section and tilt are only equipped with low intermediate legs, while the upper and lower horizontal sections according to different heads (low, Chinese and high heads) are equipped with different intermediate legs (low, Chinese and high intermediate legs).

Working principle of Large-inclination Belt Conveyor

Large inclination belt conveyor has the advantages of simple structure, reliable operation and convenient maintenance, and has the characteristics of large inclination conveyor, compact structure and less footprint, so it is the ideal equipment for large inclination conveying and vertical lifting materials.